Fenix PD12 Flashligh( 360 lumens)

NEW Fenix PD12 Flashlight, Max 360 lumens, Cree XM-L2(T6) neutral white, 1*CR123A, and instant burst mode. http://www.fenixlight.com/ProductMore.aspx?id=102&tid=9&cid=1

The Fenix PD12 Flashlight generates 360 lumen max output in a go-anywhere size. Three brightness levels and a burst mode are controlled by the side switch. Reliable, durable and ANSI-rated, the single CR123Abattery Fenix PD12 puts power where it counts

Features

·Cree XM-L2 (T6) neutral white LED with a lifespan of 50,000 hours
·Use one 3V CR123A battery
·81mm (Length) x 25.4mm (Diameter)
·48-gram weight (excluding batteries)
·Digitally regulated output - maintains constant brightness
·Reverse polarity protection guards against improper battery installation
·Anti-roll, slip-resistant body design
·Side switch on the head for simple and convenient operation  
·Made of durable aircraft-grade aluminum
·Premium Type III hard-anodized anti-abrasive finish
·Toughened ultra-clear glass lens with anti-reflective coating

Fenix ARB-L2S 18650 Li-ion battery

Description

Fenix ARB-L2S is a high capacity 18650 Li-ion rechargeable battery specially designed for high-drain devices.  With outstanding performance, excellent reliability and compact design, it is the best match for your high-drain devices.

Features

·3400mAh high capacity battery with outstanding performance
·Three sets of over-heat protection
·Built-in over-charge and over-discharge protection circuit ensure the max performance of the battery
·Unique structural design for better impact-resistant

Fenix ARE-C2 advanced multi-charger

ARE-C2 is an advanced multi-charger compatible with broad spectrum of Li-ion and Ni-MH rechargeable cell sizes and capable of charging four different rechargeable batteries simultaneously while the LCD display keeps you informed with readouts of voltage and charging status. Utilizing our exclusive accelerated charging technology, it takes only three and a half hours to fully charge four ARB-L2 (2600mAh) 18650 rechargeable batteries.

Features

·Broad spectrum of Li-ion and Ni-MH rechargeable cell sizes
·Automatically select charging modes based on the battery loaded
·Accelerated charging
·LCD display for battery voltage and charging status
·Four slots monitors and charges independently
·Advanced safety features

Fenix LD41(XM-L2) Flashlight

Fenix LD41 is a high-performance outdoor flashlight with a wide range of applications. It employs the unique dual tail cap switches to provide quick switching between four brightness levels and two flashing modes – and a momentary-on function. The elongated all-metal housing, containing four readily-available AA batteries with sufficient power, makes it comfortable to hold. Featuring constant brightness and waterproofing to IPX-8 standards, LD41 can be a good partner in various outdoor conditions and in emergencies.

Features

·Uses Cree XM-L2 (U2) LED with a lifespan of 50,000 hours
·Uses four AA (Ni-MH, Alkaline ) batteries
·175mm (Length) x 40mm (Diameter)
·198-gram weight (excluding batteries)
·Digitally regulated output maintains constant brightness
·Reverse polarity protection guards against improper battery installation
·Low-voltage reminder indicates when battery replacement is needed
·Anti-roll, slip-resistant body design
·Tactical tail cap switch with momentary-on function
·Tail mode switch, one click for brightness selection
·Made of durable aircraft-grade aluminum
·Premium Type III hard-anodized anti-abrasive finish
·Toughened ultra-clear glass lens with anti-reflective coating

Fenix TK22 Flashlight Special Edition (Grey)

Fenix TK22 features a powerful, tough, durable, and fully waterproof design intended for harsh outdoor conditions. Powered by large capacity 18650 Li-ion battery, safe 16340 LiFePO4 battery or frost-resistant CR123ALithium battery, the light makes a perfect combination of extreme brightness and ultra long runtime. The innovative side switch on the head flows between four brightness levels and strobe mode，plus the advanced constant brightness technology and waterproof to IPX-8 standard, TK22 will be your reliable partner when searching ，rescuing, etc.
http://www.fenixlight.com/ProductMore.aspx?id=100&tid=8&cid=1

Features

·Uses Cree XM-L2 (T6) LED with a lifespan of 50,000 hours
·Uses one 18650 rechargeable Li-ion battery or two 3V CR123A Lithium batteries
·147mm (Length) x 25.4mm (Diameter) x 40mm (Head)
·157-gram weight (excluding the battery)
·Digitally regulated output - maintains constant brightness
·Low-voltage warning function, to remind the users of battery replacement when in low voltage
·Reverse polarity protection, to protect from improper battery installation
·Anti-roll, slip-resistant body design
·Tactical tail cap switch with momentary-on function
·Mode switch button in the front, one press for brightness selection
·Made of durable aircraft-grade aluminum
·Premium Type III hard-anodized anti-abrasive finish
·Toughened ultra-clear glass lens with anti-reflective coating

Fenix HP15 headlamp(500 lumens)

The Fenix HP15 Headlamp pushes past current performance boundaries with 500-lumen max output and 172-meter throw.  Wear options expand as an exclusive cable extension moves the compact battery box from head to pack as desired.  Four AA batteries and five brightness levels deliver capable runtimes. A 125-lumen SOS mode, removable diffuser and 60 degrees tilt complete the HP15’s total lighting package.

Features

·Utilizes Cree XM-L2 LED with a lifespan of 50,000 hours
·Uses four AA batteries, either Ni-MH or Alkaline
·Light size：67.4mm (Length) ×55.9mm (Width) ×43.8mm (Height)
·Battery box size：88.8mm (Length) ×73.7mm (Width) ×26.2mm (Height)
·162-gram weight (excluding batteries and headlamp straps)
·Digitally regulated output maintains constant brightness
·Lockout function – prevents the light from accidental activation
·Detachable diffuser lens
·Remote battery case - reduce the weight worn on the head and optimize battery life in cold conditions
·60-degree tilt mechanism
·Reverse polarity protection guards against improper battery installation
·Made from durable aluminum alloy and performance plastic
·Toughened ultra-clear glass lens with anti-reflective coating    

FENIX tk51 flashlight

The Fenix TK51 Flashlight employs dual LEDs to increase total output with nine, wide-ranging lighting options.  Spot and flood beams include 1800 lumen max output and 425m carry distance.  For total control, one-button instant turbo and strobe activate even when the TK51 is off

Features

·Utilizes two Cree XM-L 2 (U2) LEDs with a lifespan of 50,000 hours
·Uses three 18650 rechargeable Li-ion batteries
·188mm (Length) x 48mm (Diameter)
·430-gram weight (excluding the battery)
·Digitally regulated output with low-voltage indicator
·Reverse polarity protection guards against improper battery installation
·three button interface for fast and convenient operation
·Made of durable aircraft-grade aluminum
·Premium Type III hard-anodized anti-abrasive finish
·Toughened ultra-clear glass lens with anti-reflective coating

Fenix TK76 Flashlight Global Testing Campaign

Recently，after the launch of the flashlight TK75, Fenix has successfully developed a new flashlight TK76 that will be launched soon. In order to make the customers and enthusiasts better experience the new product, we are now collecting those who are interested in participating in Fenix TK76 Global Testing Campaign. Fenix will select some participants to test the TK76 (prototype) which will be sent to you for free. Look forward to your participation and support!

1. Brief Introduction of TK76 

The Fenix TK76 Flashlight utilizes three separate LEDs to offer a broad range of illumination options and power display function. Output up to 2800 lumens creates intense area lighting combined with long reach. Ideal for group leaders needing high output and multiple beam patterns, the Fenix TK76 is a powerful addition to a team’s onsite lighting tools with instant turbo, strobe and SOS.

2. Declaration of the Testing Campaign
2.1 Fenix will send the TK76 (prototype) for free to the participants who are selected to test the TK76, after they receive the flashlight, they need to test it and publicize the reports on the relevant media according to Fenix's requirements. 
2.2 The mailing fees for the TK76 will be paid by Fenix. 

3. Requirements for the Testers
3.1 All kinds of fans, including outdoor sports enthusiasts, or consumers who are well experienced with high- end flashlights, etc.
3.2 Individuals who can write reviews or reports for flashlights, edit them with words and pictures, or take videos when they are testing the flashlight.  
3.3 Individuals that have already posted more than one review (including but not limited to flashlights)
3.4 Individuals who can post their testing reports on more than one internet media or other relevant, such as the websites or forums of flashlight, outdoor, photography, magazines and newspapers etc.  


4. Tester Registration 
4.1 Registration Period: From 8th, Oct. to 22nd, Oct., 2013.
4.2 Registration Website: 
      http://www.fenixlight.com.cn/voteen/Survey_Show.asp?Survey_id=213

5. Announcement of the qualified tester list 
5.1 Time: 23rd, Oct., 2013
5.2 Website: http://www.fenixlight.com.cn/News.aspx?cid=1

6. Requirements for writing and publishing the testing report  
6.1 The contents of your reports should include: 
A. Description and your personal feeling of the product;
B. Images and video of the products, including appearance, function, details and trial run environment;
C. Description of the testing environment and process;
D. Description of the merits and shortcomings of the product. 
6.2 Requirements for publicizing the testing reports:
A. Publicizing time
Testers should publicize the report within 20 days after receiving the TK76, and send the relevant link to Fenix by email for our reference.
B. Website for publicizing
Individuals who can post their testing reports on one or more internet media, such as the website of outdoor, flashlight, photography, etc. 
C. Please fill out the Feedback Form after publicizing of the testing report. 
http://www.fenixlight.com.cn/voteen/Survey_Show.asp?Survey_id=215                                                                        
7. Notice  
7.1 Fenix will contact those selected testers by sending emails. If no replies are received within seven working days, we'll regard them as giving up testing the Fenix product. 
7.2 It is preliminarily decided that the TK76 will be sent out in late October, 2013 (depending on the shipment condition).
7.3 Fenix reserves the rights of final interpretation of this testing campaign.