Fenix 18650 battery charger ARE-C1

Features
Charge two 18650 Li-ion batteries at the same time
Charge at home with the charger cable plugged into an AC outlet，or in your car with the included car adaptor
Microprocessor controlled, smart constant-current charge, which extends the lifespan of the battery
Short circuit protection, over current protection, over voltage protection and reverse polarity protection
Easy-to-read LED charge status indicators

Specifications
Input: 100-240V (AC), 50/60Hz，200mA(max)
      12V-24V (DC)， 1000mA (max)
Output: 4.2V (DC)， 2×1000mA
Size: 87×88×26mm（Length×Width×Height）
Weight: 110g (excluding batteries)
Operating Temperature: 5%（0℃） - 90%（40℃）(Full-load in normal working condition)  
Storage Conditions:   Temperature: -20℃ - 85℃ 
Safety Specification
Compliant Standards：CE、 PSE、FCC、SAA、RoHS

How to Use

1. Put the cathode side of the 18650 rechargeable batteries toward the spring and push it down, insert the batteries and ensure the direction of anode and the cathode is the same with the indications at the bottom of the battery holder.
2. Plug the power cable into a standard AC outlet (or plug the car adapter into the cigarette lighter in your car), the charger will check the battery status in the battery holder, and the indicator light will blink red/green alternatively. If no batteries are loaded in or the battery has been damaged, the correspondent LED light will be off and the relevant battery in the channel will not be charged. If it happens, please take out the battery to ensure your safety.
Notice: Avoid AC charging and car charging at the same time.
3. After checking the battery status, the battery charger will enter into the charging status automatically. The LED indicator light will turn red in the charging process, and then turn green when charging is complete.
4. Take out the batteries and cut off the power completely when done charging.

Attention
1. Only intended for18650 rechargeable Li-ion batteries. If charge other types of batteries, it may cause the battery breach, leakage or explosion, or even cause damage to people and property.
2. Use the battery charger in the normal working condition and cut off the power completely after use. Avoid AC charging and car charging at the same time.
3. Load the battery correctly.
4. Do not dismantle, modify the charger or use it for other purpose.
5. Keep the charger out of reach of children. Children should use the battery charger only under the guidance of adults.

Fenix BT20 Global Testing Campaign

In order to meet the versatile demands of different customers for outdoor lighting, Fenix has successfully developed the first bicycle light BT20 that will be launched soon. With the hope of enhancing the quality of Fenix products and services, we are collecting consumers and bike light enthusiasts to participate in Fenix BT20 Global Testing Campaign. Fenix will select some participants to test the BT20 (prototype sample) which will be sent you for free. We are looking forward to your participation and support.

 

1. Brief introduction of BT20

 

BT20 is a specially designed professional bicycle light for bicycle enthusiasts. It delivers a max 750-lumen output.

Employing the pioneering dual distance beam system, the upward beam of BT20 is refracted by the lens, forming an auxiliary beam in the front area of the wheels where ordinary bicycle light can not reach. With its advanced aspherical light cup design and broad beam distance up to 156m, it can bring the users a broader view in the night riding.

The active fashion style of BT20 conforms to the aerodynamics design with small wind resistance and fast heat dissipation; it is quick to attach and detach using O-ring mounting straps sized for 20mm-35mm handlebars; moreover, the direction of the headlamp can be adjusted freely, which brings you more convenience.

Powered by two 18650 rechargeable Li-ion batteries or four CR123A Lithium batteries, BT20 features four brightness levels and one variable frequency flashing mode, which satisfy your various lighting needs such as commuting, urban utility, cross country, down hill, etc.

 

2. Declaration of the Testing Campaign2.1 Fenix will send the BT20 (prototype sample) for free to the participants who are selected to test the BT20, after they received the bike light, they need to test it and publicize the reports on the relevant media according to Fenix's requirements.
2.2 The transporting freight for the BT20 will be paid by Fenix.

 

3. Requirements for the Testers3.1 All kinds of fans, including cyclists, outdoor sports fans, or consumers who are well experienced with high end bike light, etc.
3.2 Individuals who can write reviews or reports for bike light, edit it with words and pictures, or take videos when they are testing the flashlight. 
3.3 Individuals that have already posted more than one review (Content is not limited to bicycle light)
3.4 Individuals who can post their testing reports on more than one internet media, such as the website of cycling, photography, outdoor, flashlight, etc.

 

4. Tester Registration4.1 Registration Deadline: From September 15th to October 7th, 2012.
4.2 Registration Web Link:
      http://www.fenixlight.com.cn/voteen/Survey_Show.asp?Survey_id=197

 

5. The Announcement of the qualified tester list5.1 Announce Time: October, 9th, 2012
5.2 Announce Address: 'Company news' channel on Fenix official website
      http://www.fenixlight.com/news.asp?action=cnews

 

6. Requirements for writing and publishing the testing report6.1 The contents of your reports should include:
A. Description and your personal feeling of the product.
B. Images and video of the products, including appearance, function, details and trial run environment.
C. Description of the testing environment and process.
D. Description of the merits and shortcomings of the product.

 

6.2 Requirements for publicizing the testing reports:
A. Publicizing time
Testers should publicize the report within 20 days after receiving the BT20, and send the website link to Fenix by email for our reference.
B. Website for publicizing
Individuals who can post their testing reports on more than one internet media, such as the website of cycling, photography, outdoor, flashlight, etc.

C. Feedback Form
    Please fill out the Feedback Form after publicizing of the testing report in this link:
    http://www.fenixlight.com.cn/voteen/Survey_Show.asp?Survey_id=198

 

7. Notice7.1 Fenix will contact those selected testers by sending emails. If we receive no reply from them within seven working days, we抣l regard them as giving up testing the Fenix product.
7.2 It is preliminary decided that BT20 bike lights will be sent out in the Middle October, 2012.
7.3 Fenix reserves the rights of final interpretation of the campaign.

Fenix TK15(S2) Flashlight

Fenix TK15 delivers a max 400-lumen output and 252m throw with one 18650 battery or two CR123A batteries. The innovative side switch flows between four brightness levels and Strobe mode. Tough, durable and waterproof to IPX-8 standard, TK15 will be your reliable partner when hunting, searching and rescuing, etc.

Operation Instruction
Press the tail cap switch lightly to activate the flashlight momentarily (without any press, it will be off); Press the tail cap switch completely to turn on the flashlight and lock it. Another press will unlock it and turn it off.
When the flashlight is on, a single press on the side mode switch in the front will select the brightness levels in the order of Turbo→Low→Mid→High;
Press and hold the mode switch button for about one second to enter into the Strobe. It will flash between 6Hz and 15Hz every two seconds.
Under the condition of Strobe, a single press on the mode switch button will return the flashlight to the general mode.
The flashlight memorizes the last brightness level used in the general mode even after changing the batteries (it will not remember any flashing modes). The next time you turn on the flashlight, it will light up at the last used general mode.
Overheating protection: TK15 will accumulate a lot of heat when it is working in Turbo output. To avoid overheating, the flashlight will automatically transfer into the high brightness level after working in Turbo output for over 30 minutes. If the Turbo output is needed continually, just reset it again.